Camera lens features, in plain English

Focal length and price only tell you half the story. Here is what stabilisation, aperture, sealing and the optical jargon actually mean, and which ones are worth paying for.

50mmF/1.4 PRIME24 to 70F/2.8 ZOOM70 to 200F/2.8 IS
The short versionPick and go

If you only read one table

A lens spec sheet is a long list of letters and numbers. Most of it only matters for certain kinds of shooting. Find what you shoot, look at the middle column, and ignore the rest.

You shootLook forSafe to ignore
Portraits and weddingsFaces, low light roomsWide aperture, smooth bokeh, quick autofocusWeather sealing
Sport and wildlifeLong lenses, fast subjectsStabilisation, fast autofocus, a fast apertureBokeh quality
LandscapeTripod, sharp edgesEdge to edge sharpness, low distortion, sealingAutofocus speed
AstroStars, night skyLittle coma, wide apertureStabilisation
VideoPulling focus, zoomingLow focus breathing, parfocal zoom, linear focusComa
Street and travelCarried all daySmall and light, sealingMaximum aperture

Every lens has trade offs. The right lens is the one with the features you need and nothing you do not.

The simple versionFive things

Five things that matter

Skip the spec sheet. These are the only five questions worth asking before you buy a lens.

1. Does it fit?

Match the mount to your camera, then check whether it is made for full frame or the smaller APS C sensor.

Check: mount name on your body

2. How wide is the aperture?

A low f number, f/2.8 or lower, lets in more light and blurs the background. Pay for this first.

Good for: portraits, low light

3. Is it stabilised?

Worth having on long lenses. It steadies the picture when you shoot slow or zoomed in.

Good for: telephotos, video

4. Does it focus well?

Almost every modern lens has autofocus. Video shooters should look for smooth, quiet focus and a proper manual ring.

Check: reviews for your use

5. Ignore the rest

Weather sealing is a bonus. Distortion and colour fringing can be fixed in editing, so do not pay extra to avoid them.

Skip: spec sheet jargon
Step oneCheck your slot

Will it even fit your camera?

Before any feature matters, the lens has to fit. Mount, system and sensor size decide your shortlist.

Full frame lens, full frame bodyWHOLE SENSOR COVEREDFull frame lens, APS C bodyWORKS, TIGHTER VIEWAPS C lens, full frame bodyCORNERS GO DARKTHE CIRCLE IS THE LIGHT THE LENS THROWS. THE RECTANGLE IS YOUR SENSOR.
A full frame lens covers any sensor. An APS C lens only lights a smaller circle, so on full frame the corners go dark.

Lens mount

Most brands use their own mount, so a lens does not cross from one maker to another. The exceptions are the L mount group (Leica, Sigma, Panasonic) and Micro Four Thirds (Olympus and Panasonic).

Check: the mount name on your body

DSLR or mirrorless

The mounts differ, even inside one brand. Canon and Nikon sell adapters, and third party ones exist, but they can perform worse than a native lens.

Check: which system you shoot

Third party lenses

Sigma, Tamron and others aim for similar image quality at a lower price. Worth a look before you pay the brand premium.

Check: reviews for your mount
In depth

Crop factor and equivalent focal length

A smaller sensor sees a narrower slice of what the lens projects. Multiply the focal length by the crop factor to get the full frame equivalent field of view. The f number stays the same, but a 50mm f/1.8 on APS C gives the framing of a 75mm and the depth of field of about a 75mm f/2.7 on full frame.

FormatCrop factorA 50mm lens acts like
Full frame1.0x50mm
APS C (Nikon, Sony, Fuji)1.5x75mm
APS C (Canon)1.6x80mm
Micro Four Thirds2.0x100mm
Medium format (44 x 33mm)0.79xAbout 40mm

Flange distance and adapters

The flange distance is the gap between the mount and the sensor. Mirrorless mounts have a short one, so a DSLR lens can be adapted forward and still reach infinity focus. The reverse does not work because there is no room for the adapter. Canon EF is 44mm against RF at 20mm. Nikon F is 46.5mm against Z at 16mm. Sony E is 18mm.

The big oneLight and blur

Aperture, and why f numbers run backwards

Aperture controls how much light gets in and how much of the scene is sharp. A smaller f number is a bigger opening, so the numbers read the wrong way round until you get used to them.

f/1.4FULL LIGHTf/21/2 LIGHTf/2.81/4 LIGHTf/41/8 LIGHTf/81/32 LIGHTf/161/128 LIGHTEACH STEP DOWN THE SCALE LETS IN ABOUT HALF AS MUCH LIGHT AND DEEPENS THE FOCUS
Opening size for six common f numbers. The same lens, the same light, a very different amount getting in.
01

Fast lenses

Most important

A fast lens has a low f number, f/2.8 or lower. It is what you want in dim rooms, for blurred backgrounds and for keeping shutter speeds high.

Many zooms have a variable aperture. A 100 to 400mm f/4.5 to 5.6 is f/4.5 at the wide end and f/5.6 at the long end.

Verdict: pay for aperture first if you shoot people or low light.

For
  • Lets in more light
  • Shallower depth of field
  • Faster shutter speeds in the dark
Against
  • Bigger, heavier and more expensive
  • Needs careful focus wide open
Fast means
f/2.8 or lower
Smaller number
Bigger opening
Variable example
f/4.5 to 5.6 on a 100 to 400mm
In depth

The maths

The f number is the focal length divided by the diameter of the entrance pupil. A 50mm f/1.4 has an opening about 36mm across. Each full stop multiplies the f number by about 1.41, which halves the area and so halves the light.

The full stop scale runs f/1, 1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22.

Diffraction

Stop down too far and light bends around the blade edges, softening the whole frame. On full frame it starts to show around f/11, and earlier on smaller sensors. Most lenses are sharpest two or three stops down from wide open.

T stops

Cinema lenses are marked in T stops, which measure the light actually transmitted. Two lenses at T2.8 expose the same. An f stop is a calculation, and real glass loses a little.

Keep it steadyShake and panning

Image stabilisation, and its three modes

Stabilisation counters camera shake, so you can shoot at slower shutter speeds in low light and keep long telephotos steady. Many modern bodies also stabilise the sensor (IBIS), and some combine that with the lens.

Mode 1

General use. Cancels shake in every direction. For still subjects.

PAN

Mode 2

Panning. Cancels up and down shake only, so you can follow a subject moving in a straight line.

ERRATIC SUBJECT PATH

Mode 3

On some lenses. Copes with erratic movement, like athletes or birds in flight.

02

Lens stabilisation

Worth paying for

Essential on long lenses and a bonus on wides if your body already has IBIS. The extra hardware adds weight.

Verdict: buy it on telephotos, check before paying extra on wides.

For
  • Slower shutter speeds in low light
  • Steadier video
  • Useful on heavy telephotos
Against
  • Adds weight
  • Can be redundant with IBIS
Canon
IS
Nikon
VR
Sony
OSS
Tamron
VC
Sigma
OS
In depth

How many stops can you gain

Makers quote stabilisation in stops using the CIPA test, and combined body and lens systems now claim up to around 7 or 8 in the best case. Each stop doubles the slowest safe shutter time. The old rule is one over the focal length, so 200mm wants 1/200s.

Stops of helpHandheld shutter at 200mm
01/200s
11/100s
21/50s
31/25s
41/12s
51/6s

Real life tends to land around three or four stops, and it does nothing for a moving subject. On a tripod, switch it off on older lenses, because they can hunt and add blur.

How it focusesAuto, manual, wire

Autofocus, manual focus and what the ring does

Almost every modern lens focuses automatically, with a switch on the lens or a menu option for manual. Manual matters when autofocus struggles in low light or low contrast, and for night, macro and landscape work.

0.5m1m2m5mINFRING POSITION = DISTANCEREPEATABLE PULLS

Linear focus

Mechanical. Each ring position is a real distance, so the lens can carry a scale and you can repeat a pull exactly.

RINGCAMERAMOTORMOTORSIGNAL, NOT A FIXED POSITIONFAST AF, LESS PRECISE MANUAL

Focus by wire

Electronic. Quick autofocus, but manual focus is less precise and the ring does not map to a set distance.

03

Autofocus or manual

Check it works

Pure manual lenses are still around, usually cheaper than autofocus equivalents, and loved by people who focus slowly and carefully.

Verdict: autofocus for almost everyone, manual or linear for video and slow work.

For
  • Autofocus is fast and convenient
  • Manual gives full control
  • Manual lenses cost less
Against
  • Autofocus can hunt in the dark
  • Manual is slow for moving subjects
Switch
On the lens or in the camera menu
Best for manual
Night, macro, landscape
Video users
Prefer linear focus
In depth

Focus motors

Motor typeFeelBest for
Ultrasonic ring (USM, SWM, HSM)Fast and quiet, usually with full time manual overrideStills and sport
Stepping motor (STM and similar)Smooth and near silentVideo
Linear or voice coilVery fast and precise, moves large heavy focus groupsTracking and bursts

Internal focus and close focus

Internal focus keeps the barrel length fixed, which helps with filters and sealing. Minimum focus distance and maximum magnification tell you how close you can get. A ratio of 1 to 1 is true macro.

Built to be used outsideSeals

Weather sealing

Seals around the switches, rings and mount keep out water and dust. Higher end lenses usually have them.

FRONT ELEMENT EDGEZOOM RING GAPSSWITCHESFOCUS RING GAPSMOUNT GASKET
The usual seal points on a weather sealed lens. Makers choose their own.
04

Sealed lenses

Nice to have

There is no industry standard for what counts as weather sealed, and it does not mean weatherproof. Treat it as extra protection, not a licence to leave your kit in the rain.

Verdict: worth it if you shoot outside in bad conditions, otherwise skip.

For
  • Keeps out dust and light rain
  • More confidence outdoors
Against
  • No standard definition
  • Not waterproof
  • Usually costs more
Where
Front, rings, switches, mount
Standard
None
The glassWhat is inside

Elements, groups and coatings

The optics inside decide how clean the image is. You do not need the full diagram, only what these parts do.

1234567ONE GROUP
A simplified lens cutaway. Real lenses can have more than a dozen elements.
  1. 1Element. One piece of glass that bends light.
  2. 2Group. Elements that work together. Some groups move to zoom, focus or stabilise.
  3. 3Low dispersion glass. Materials like fluorite cut colour fringing.
  4. 4Aspherical element. Reduces distortion on wides and softness on fast lenses.
  5. 5Coatings. Anti reflective to cut flare and ghosting, UV, water and oil repellent, scratch resistant.
  6. 6Aperture blades. They set the opening.
  7. 7Focus group. Slides back and forth to bring the subject sharp.
In depth

Why more elements

More elements let designers correct more flaws, at the cost of weight, flare risk and price. A pro 24 to 70 f/2.8 typically runs somewhere between 15 and 20 elements. Simple primes can use far fewer.

Special glass

TypeWhat it does
Fluorite, ED, UD, SLDLowers colour fringing
AsphericalCorrects spherical aberration and distortion with fewer elements
High refractive indexBends light harder so the lens can be thinner
Nano or multi layer coatingsCut ghosting and flare
Fluorine coatingSheds water and fingerprints

Aperture blades

Rounder blades give rounder out of focus highlights when you stop down. Seven, nine and eleven blades are common. Straight blades can draw polygon shaped highlights.

The flawsWhat shows in the file

Optical quirks, bokeh and zoom behaviour

Every lens has flaws. What matters is which ones you can fix later and which are baked in.

Chromatic aberration

Colour fringing on high contrast edges.

Fix: easy in editing, stop down

Barrel distortion

Straight lines bow outward. Common on wide angles.

Fix: yes in editing

Pincushion distortion

Straight lines bow inward. Common on telephotos.

Fix: yes in editing

Moustache distortion

A mix of both, wavy lines.

Fix: partly in editing

Coma

Stars at the edges stretch into comets. Mainly astro.

Fix: not in editing. Stop down or pick a lens with little coma
SMOOTHONION RINGS

Bokeh

Good is smooth and creamy. Bad is busy, with onion ring highlights.

Fix: not in editing
FOCUSED FARFOCUSED NEAR

Focus breathing

The view zooms slightly as you change focus. Pro lenses show less.

Fix: limited. Choose low breathing for video
PARFOCAL: STAYS SHARPVARIFOCAL: REFOCUS

Parfocal or varifocal

Parfocal zooms hold focus as you zoom. Varifocal ones drift.

Matters for: video, events
In depth

Aberrations and whether editing fixes them

AberrationWhat you seeFix in editing
Lateral chromatic aberrationColour fringes on edges, stronger towards the cornersYes, mostly
Longitudinal chromatic aberrationMagenta and green fringes in front of and behind the focus planePartly
Spherical aberrationGlow or softness wide open, sometimes a focus shift when you stop downNo, stop down
ComaStars turn into comets in the cornersNo
AstigmatismCorner detail smeared in one directionNo
Field curvatureCentre sharp while the edges are soft at the same distanceNo
VignettingDark corners, worst wide openYes
DistortionStraight lines bendYes
Flare and ghostingHaze and bright blobs from light sourcesNo, use a hood and good coatings

Reading an MTF chart

Each curve shows contrast at a set detail level, such as 10 or 30 lines per millimetre, from the centre of the frame out to the corner. Two line styles show detail running in two directions, and a gap between them points to astigmatism. Higher and closer together is better. Most maker charts are calculated from the design rather than measured on real copies, so independent test charts are the more honest read.

Studio rules of thumb
  • Pick the mount and sensor size first, then features.
  • Pay for aperture and stabilisation before anything else.
  • Treat weather sealing as bonus protection, not weatherproofing.
  • If it can be fixed in editing, do not pay extra to avoid it. Coma and bad bokeh cannot be fixed.
  • Stop down two or three stops from wide open for the sharpest result, and stop short of f/11 on full frame.
  • Test a lens on your own body before you buy. Copies vary.
The jargonIn plain English

The jargon, in plain English

Fast lens

A lens with a wide maximum aperture, f/2.8 or lower.

IBIS

In body image stabilisation. The sensor moves to cancel shake, and some bodies pair it with lens stabilisation.

Mount

The connection between lens and camera. Different mounts do not fit each other without an adapter.

APS C

A smaller sensor than full frame. Full frame lenses fit it, but not the other way round.

Element

One piece of glass inside the lens.

Group

A set of elements that move or work together.

Focus breathing

The picture appears to zoom a little as you change focus.

Bokeh

From the Japanese word for blur. It describes how the out of focus areas look.

Before you payTen minutes

Test a lens before you buy it

Corners wide open

Shoot a flat, textured wall at the widest aperture. Zoom to 100 percent and compare the corners with the centre.

Shows: softness, vignetting

Fringing

Shoot bare branches against a bright sky. Look along the high contrast edges for green and magenta.

Shows: chromatic aberration

Focus accuracy

Shoot a ruler laid at an angle and see where sharpness lands compared with where you aimed.

Shows: back or front focus

Breathing and creep

Film a slow focus pull. Then point a zoom at the floor and see whether the barrel slides out by itself.

Shows: breathing, zoom creep
MethodHow this was put together

How this guide works

This guide explains each feature using standard optical principles and the terms manufacturers use on spec sheets. The diagrams are simplified to show the idea, not to scale. Stabilisation names differ by brand, so always check the exact name on the lens you are buying.

Weather sealing has no industry standard. Check what the maker claims for your exact lens.

Plain White Studio Journal
Next
Next

The best memory cards for your camera